Using The Ladder Designer; Demo 1 (Beep & Count) - ICP DAS USA TPD Series Programming Manual

3.2 Using the Ladder Designer

3.2.1 Demo 1 (Beep & Count)
Demo 1 is programmed using the Ladder Designer and implements a single button that
will beep when clicked on and will increase the counter by one. The counter will reset to
zero when it reaches to ten.
Step 1: Create a new TPD-703-64 project based on the Ladder Designer (refer to
Section 2.2
Enter the default
directory for saving
the project
Select the HMI display
orientation
Select the device
TPD/VPD Series – Programming Guide v.1.0.6
Copyright@ 2020 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
for more details).
c.
d.
a.
Select the
programming type
Enter a project name
b.
e.
Page 47