Demo 4 (Remotely Control The Icpdas I/O Model) - ICP DAS USA TPD Series Programming Manual

3.2.4 Demo 4 (Remotely control the ICPDAS I/O model)

Demo 4 is programmed using the Ladder Designer and implements that remotely control
the ICPDAS I/O model.
In this demo, we use the ICPDAS M-7055 model to demonstrate. This demo will use the
switch on the screen of the TPD model to control the DO of the M-7055 model, and the
TPD also update the DI status of the M-7055 model at any time on its screen.
Please connect the DI pin and the DO pin of the M-7055 model, i.e., DI0 connects to DO0,
DI1 connects to DO1, DI2 connects to DO2... etc. Please refer the manual of M-7055 to
view the detailed wiring.
http://www.icpdas.com/web/product/download/io_and_unit/rs-485/document/manual/7
000/I-7000_M-7000_DIO_en.pdf
Step 1: Create a new TPD-703-64 project based on the Ladder Designer (refer to
Section 2.2
Enter the default directory
for saving the project
Select the HMI display
orientation
Select the device
TPD/VPD Series – Programming Guide v.1.0.6
Copyright@ 2020 ICP DAS CO., LTD. All Rights Reserved. E-mail: service@icpdas.com
for more details).
c.
d.
Select the
a.
programming type
b.
Enter a project name
e.
Page 66