TP-Link TL-MR3420 Quick Installation Manual page 10

English
Q2. How to reset the router to its factory default settings?
• While the router is powered on, press and hold the
then release the button. The router will automatically reboot itself.
• Log into the router's web interface to restore the router to factory settings.
Q3. What should I do if the login window does not appear?
• If the computer is set to a static or fixed IP address, change the setting to obtain an IP address automatically.
http://tplinkwifi.net
• Verify that
http://192.168.1.1
• Use another web browser and try again.
• Please reset your router to its factory default settings ( FAQ > Q2) and try again.
• Disable then enable the network adapter in use.
Q4. What should I do if I forget my web management password?
• Reset the router to its factory default settings ( FAQ > Q2) , and create a password to log in.
Q5. What should I do if I forget my wireless network password?
• Log into the router's web interface to retrieve or reset your wireless password.
Note: For more troubleshooting help, please refer to FAQ on our website: http://www.tp-link.com/en/support/faq.
8
is correctly entered in the web browser. Alternatively, check spacing and enter
in the web browser.
RESET
button on the rear panel until all the LEDs are on and