Specifications; Setup - Bauer 57179 Owner's Manual & Safety Instructions

Specifications

Setup - Before use:
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
note: For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 22.
Mounting
1. Use the four bolt holes provided in the Base
to mount the Miter Saw to a stable support
before use. Mounting hardware not included.
assembly
1. Slide the Dust Collection Bag over the Dust Outlet at
the rear of the Saw Head Assembly.
2. Install the Right Sliding Fence:
a. Loosen the Fence Lock Knob
counter-clockwise.
b. Insert the Right Sliding Fence into the slot
and slide the Fence to the desired position.
c. Tighten the Fence Lock Knob.
Page 8
Electrical Rating
Rated No Load Speed
45° C ross Cut Capacity
90° C ross Cut Capacity
Maximum Bevel
Maximum Miter
Saw Blade
For technical questions, please call 1-888-866-5797.
120 V AC / 60 H z / 15 A
4500 RPM
3-1/2" x 9"
3-1/2" x 12-1/2"
48° L eft and Right
52° L eft – 60° Right
10" Diameter,
5/8" Round Arbor
4500 Minimum RPM Rating
2. Ensure that the Miter Saw is always stable
and secure (e.g. fixed to a bench).
Dust
Outlet
Dust
Bag
right Sliding
Fence
Fence
Lock Knob
Figure a
Figure B
Item 57179