Download
Share
Print this page
Bauer 57179 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Bauer Manuals
  4. Saw
  5. 57179
  6. Owner's manual & safety instructions

Bauer 57179 Owner's Manual & Safety Instructions

10" dual-bevel sliding compound miter saw
Hide thumbs Also See for 57179:

Advertisement

Quick Links

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2020 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20h

Advertisement

loading
Need help?

Need help?

Do you have a question about the 57179 and is the answer not in the manual?

Questions and answers

Richard Huff
June 16, 2025

21,28,29 part numbers needed for model 19743eb saw need

0
Mark Chalfin
February 8, 2025

I have the 10 inchBauer duel compound sliding miter saw, and the light that shows the cut line is out. Can I get a replacement?

0

Subscribe to Our Youtube Channel

Related Manuals for Bauer 57179

Summary of Contents for Bauer 57179

  • Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

  • Page 2: Table Of Contents

    Cluttered or dark areas invite accidents. create sparks which may ignite the dust or fumes. c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. Page 2 For technical questions, please call 1-888-866-5797. Item 57179...

  • Page 3: Safety

    The correct power tool will do the job better and safer at the rate for which it was designed. Item 57179 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 A level and firm work surface reduces the risk of the mitre saw becoming unstable. Page 4 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 5 .mitre saw. g. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. Item 57179 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-prong plug.) Outlets for 2-prong plug Page 6 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 7 Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning n 0 xxxx/min. No Load Revolutions per Minute (RPM) Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 57179 For technical questions, please call 1-888-866-5797. Page 7...

  • Page 8: Specifications

    Loosen the Fence Lock Knob counter-clockwise. b. Insert the Right Sliding Fence into the slot and slide the Fence to the desired position. c. Tighten the Fence Lock Knob. Fence Lock Knob Figure B Page 8 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 9 Depth Adjustment Bolt Dust Bag Workpiece Depth Stop Miter Latch Clamp Lever Detent Latch Button Kerf Board Bevel Angle Lock Button Fence Slide Lock Wrench Lock Knob Knob Mounting Hole Item 57179 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Dust Outlet at the rear of the Saw Head vacuum hose to use a dust collection Assembly. Refer to Assembly on page 8. system instead of the Dust Bag. Page 10 For technical questions, please call 1-888-866-5797. Item 57179...

  • Page 11: Operation

    10. WarninG! tO prEVEnt SEriOuS inJury: of the saw′s head and hold it in. Make sure the Lower Blade Guard operates smoothly and properly protects from the Blade before using the Saw. Item 57179 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12 Fence clear of the Blade’s cutting path after making any adjustment to the cutting angle. Move the Blade through its full range of motion to ensure the Fences are clear. Figure F Page 12 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 13 Kerf Boards in place. 3. If the Saw Blade hits either of the Kerf Boards, loosen the three screws for that Board and adjust. Tighten the screws and check again for blade clearance. Item 57179 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 9. Use two hands and hold workpiece securely will cut. Align the marked location of the cut on the against table and fence at all times. workpiece with the edge of the Saw Blade shadow. Page 14 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 15 13. To prevent accidents, turn off the tool and unplug it after use. Clean, then store the tool indoors out of children’s reach. cutting Operations cross cut Miter cut compound cut Bevel cut Item 57179 For technical questions, please call 1-888-866-5797. Page 15...

  • Page 16: Maintenance

    Saw Head Assembly to its rearmost adjusting adjusting position and retighten the Knob. Bolts Bolts 3. Lower the Saw Head Assembly and lock it in place using the Head Lock-Down Pin. Page 16 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 17 13. Pull down the Saw Head until the Bevel Set Bolt Bevel Set Bolt Blade just enters the table insert. 14. Place a triangle square on the Miter Table and up against the Saw Blade. Item 57179 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18 1. Loosen the Adjustment Screw holding the Miter Angle Indicator in place. Miter Miter angle angle 2. Rotate it until the pointer is exactly on 0º. indicator indicator 3. Retighten the Screw. Page 18 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 19 See Extension Cords in Grounding section on page 6. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 57179 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 20 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 21 Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 57179 For technical questions, please call 1-888-866-5797. Page 21...

  • Page 22: Parts List And Diagram

    134 Screw 203 Self-Tapping Screw Rotating Limit Plate 135 Right Lamp Holder 204 Set Screw Screw 136 LED Light 205 Shield Cushion Spring 137 LED Cover Flat Washer 138 Tapping Screw Page 22 For technical questions, please call 1-888-866-5797. Item 57179...
  • Page 23 Diagram Item 57179 For technical questions, please call 1-888-866-5797. Page 23...

  • Page 24: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Save PDF