GYS MAGYS 450 WS Quick Start Manual
GYS MAGYS 450 WS Quick Start Manual

GYS MAGYS 450 WS Quick Start Manual

Gouging
Hide thumbs Also See for MAGYS 450 WS:

Advertisement

Gouging with MAGYS 450 WS
The MAGYS 450 WS is a MIG-MAG water cooled semi-automatic welding generator designed for industry purposes. This machine
offers in addition to its conventional use, the gouging function.
Gouging is an operation applied to steels and carbon. It enables to dig a trench to remove a weld or repair external or internal weld
default. The gouging feature offered by the MAGYS 450 WS is performed by a thermal process Arc-Air®. This process eliminates the
metal locally, along a groove, creating a welding pool with the electric arc. This molten metal is then ejected with a compressed air
jet.

Torch connection

The special gouging torch has an electrical power connection and a connection for a compressed air supply. A 5m connection cable
(ref. 040670) connects the torch to the MAGYS 450 WS and to the compressed air supply.
1 - Screw the air connector to the brass fitting of the torch. This connector will be connected to the compressed air supply (image 1)
2 - Then screw the 5m connection cable lug on the torch brass connector using the nut and screw provided. (image 1)
3 - Connect the 5m connection cable to the back of the MAGYS 450 WS. (image 2)
4- The earth clamp connects to the front of the generator, in the same way as for welding (image 2)
1
2
+

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAGYS 450 WS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GYS MAGYS 450 WS

  • Page 1 Gouging is an operation applied to steels and carbon. It enables to dig a trench to remove a weld or repair external or internal weld default. The gouging feature offered by the MAGYS 450 WS is performed by a thermal process Arc-Air®. This process eliminates the metal locally, along a groove, creating a welding pool with the electric arc.
  • Page 2 It is mandatory to use protective equipment as well as clear the working area to ensure the safety of others. Informations : The MAGYS 450 WS can perform this operation with electrodes with a maximum diameter of 8 mm. Diameter Current Gouging ø...

This manual is also suitable for:

041516

Table of Contents