Vecow SPC-7000 User Manual page 92

3. VDM Configuration
a) Change the setting on "Enable VMD controller" to Enabled
b) Change the setting on "Enable VMD Global Mapping" to Enabled
4. Save Changes and Reset. When asked if you want to save changes, click "Yes".
5. Access BIOS menu again, select Intel(R) Rapid Storage Technology.
6. Select Create RAID Volume on BIOS menu.
7. Select disks to create RAID Volume then Save Changes and Reset to install
OS with UEFI mode.
©Vecow SPC-7000/7100/7200 User Manual Appendix C 85