Front Panel I/O & Functions - Vecow SPC-7000 User Manual

2.2 Front Panel I/O & Functions
2.2.1 SPC-7000/7100/7200 Front I/O & Functions
In Vecow's SPC-7000/7100/7200 series family, all I/O connectors are located on the
front panel. Most of the general connections to the computer device, such as Audio,
USB3.2, USB 2.0, LAN Jack, and Display Port, are placed on the front panel.
2.2.2 Reset Tact Switch
It is a hardware reset switch. Use this switch to reset the system without power off
the system. Press the Reset Switch for a few seconds, then reset will be enabled.
2.2.3 Power Button
The power button is a non-latched switch. In case of system halts, you can press
and hold the power button for 4 seconds to compulsorily shut down the system.
Please note that a 4 seconds interval is kept by the system between two on/off
operations (i.e. once turning off the system, you shall wait for 4 seconds to initiate
another power-on operation).
©Vecow SPC-7000/7100/7200 User Manual GETTING TO KNOW YOUR SPC-7000 13