Vecow SPC-7000 User Manual page 23

2.2.9 10/100/1000/2500 Mbps Ethernet Port
There are two 8-pin RJ-45 jacks supporting 10/100/1000/2500 Mbps Ethernet
connections in the front side. LAN at right side is powered by Intel
Ethernet engine; LAN at left side is powered by Intel i219-LM Ethernet Phy.
When both of LANs work in normal status, iAMT function is enabled. Using
suitable RJ-45 cable, you can connect the system to a computer, or to any other
devices with Ethernet connection, for example, a hub or a switch. Moreover,
both of LANs support Wake on LAN and Pre-boot functions.
2.2.10 Remote Power On/Off Switch and Ignition Control
It is a 3-pin power-on/power-off switch through Phoenix Contact terminal block.
You could turn on or off the system power by using this contact. This terminal
block supports dual function on soft power-on/power-off (instant off or delay
four seconds), and suspend mode. Another function is provided ignition power
control feature for in-vehicle applications. The built-in MCU monitors the ignition
signal and turns on/off the system according to pre-defined on/off delay period.
©Vecow SPC-7000/7100/7200 User Manual
1 2 3
Pin No.
1 Ignition (IGN)
2
3
GETTING TO KNOW YOUR SPC-7000
®
i225-IT
Definition
SW+
SW-
16