Vecow SPC-7000 User Manual page 82

4.5.1 HDD Security Configuration
Figure 4-5-1 : HDD Security Settings
Set User Password
Set HDD user password.
*** Advisable to power cycle system after setting hard disk passwords***.
Discard or save changes option in setup does not have any impact on HDD
when password is set or removed. If the 'Set HDD user Password' option is
gray, do power cycle to enable the option again.
4.5.2 Security Boot
Figure 4-5-2 : Security Boot Settings
Secure Boot
Secure Boot feature is Active if Secure Boot is Enabled, Platform Key (PK) is enrolled
and the System is in User mode. The mode change requires platform reset.
Secure Boot Mode
Secure Boot mode options : Standard or Custom.
In Custom mode, Secure Boot Policy variables can be configured by a physically
present user without full authentication.
Key Management
Enables expert users to modify Secure Boot Policy variables without full authentication.
©Vecow SPC-7000/7100/7200 User Manual BIOS SETUP 75