LG FH4G1BCS0 Owner's Manual page 39

global_main.book.book Page 39 Thursday, October 8, 2020 5:49 PM
Using the Appliance Remotely
Remote Start
Use a smartphone to control your
appliance remotely. You can also
monitor your cycle operation so you
know how much time is left in the cycle.
Using this function
1
Put the clothes into the drum.
• If desired, add bleach or fabric
softener to the appropriate areas of
the dispenser.
2
Press the Power button.
3
Press and hold Remote Start button
for 3 seconds to enable the remote
control function.
4
Start a cycle from the LG ThinQ
application on your smartphone.
NOTE
• Once this function is enabled, you can
only start a cycle from the LG ThinQ
smartphone application. If the cycle is
not started, the appliance will wait to
start the cycle until it is turned off
remotely from the application or this
function is disabled.
• If the door has been opened, you can
not start a cycle remotely.
Disable this function manually
When this function is activated, press
and hold the Remote Start button for 3
seconds.
SMART FUNCTIONS
Wireless LAN Module
Specifications
Model LCW-003
Frequency 2412 to 2472 MHz
Range
Output IEEE 802.11b: 18.37 dBm
Power
IEEE 802.11g: 17.67 dBm
(Max.)
IEEE 802.11n: 17.67 dBm
Wireless function S/W version: V 1.0
For consideration of the user, this device
should be installed and operated with a
minimum distance of 20 cm between the
device and the body.
Declaration of Conformity
Hereby, LG Electronics declares that the
radio equipment type Washing Machine
is in compliance with Directive 2014/53/
EU. The full text of the EU declaration of
conformity is available at the following
internet address:
http://www.lg.com/global/support/
cedoc/cedoc#
LG Electronics European Shared Service
Centre B.V.
Krijgsman 1, 1186 DM Amstelveen, The
Netherlands
Standby Power Consumption
Standby power consumption
Network standby power
consumption
39
0.5 W
2.0 W