Page 1
<< NOTES >> 1. Material,printing and exterier size are refer to work tables. 2. Printing, tsxt size and line are based on LG desing film. 3. Exterier size on the drawing is cutting line. 4. Before product controlled by criteria sample.
SAFETY INSTRUCTIONS The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. This symbol is displayed to indicate matters and operations that can cause risk.
Page 5
For use in Europe: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 6
•This appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance, in such a way that a full opening of the appliance door is restricted. •This appliance must be grounded.
Page 7
•Never reach into the appliance while it is operating. Wait until the drum has completely stopped. •In case of flood, disconnect the power plug and contact the LG Electronics customer information centre. •Do not push down the door excessively, when the appliance door is open.
Page 8
•Do not touch the power plug or the appliance controls with wet hands. •Do not bend the power cable excessively or place a heavy object on it. •Do not wash rugs, mats, shoes or pet blankets, or any other items other than clothes or sheets, in this machine.
Page 9
Maintenance •Securely plug the power plug in the socket outlet after completely removing any moisture and dust. •Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power supply. •Do not spray water inside or outside the appliance to clean it.
Specifications FG1450H3WN Model FH4G1JCH(P)(0-9)N Wash Capacity 10.5 kg (Wash) / 7 kg (Dry) Power Supply 220 - 240 V~, 50 Hz Size 600 mm (W) x 610 mm (D) x 850 mm (H) Product Weight 86 kg Permissible Water pressure 0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm²) •...
Installation Place • If it is impossible to avoid positioning the appliance next to a gas cooker or coal burning Requirements stove, an insulation (85x60 cm) covered with aluminum foil on the side facing the cooker Location or stove must be inserted between the two appliances.
Unpacking and Removing Install the hole caps. Transit Bolts • Locate the hole caps included in the accessory pack or attached on the back. Lift the appliance off the foam base. • If you must lay the appliance down to remove the carton base, always protect the side of the appliance and lay it carefully on its side.
• Push or rock the top edges of the appliance gently to make sure that the appliance does not rock. If the appliance rocks, level the appliance again. NOTE • You can obtain anti-slip sheets from the LG Service Centre.
Leveling the Appliance Connecting the Water Supply Hose If the floor is uneven, turn the adjustable feet as required (Do not insert pieces of wood etc. under • Water pressure must be between 0.1 MPa and the feet). Make sure that all four feet are stable 1.0 MPa (1.0‒10.0 kgf/cm and resting on the floor and then check that the •...
Page 16
Connecting Hose to Water Tap Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection. Tighten the four fixing screws. Connecting Screw-Type Hose to Tap with Thread Screw the hose connector onto the water supply tap.
Page 17
Connecting Hose to Appliance Push the adapter onto the end of the tap so that the rubber seal forms a watertight Attach the hot water line to the hot water supply connection. Tighten the four fixing screws on the back of the washer. Attach the cold water and the adapter ring plate.
Installing the Drain Hose • The drain hose should not be placed higher than 100 cm above the floor. Water in the appliance may not drain or may drain slowly. • Securing the drain hose correctly will protect the floor from damage due to water leakage. •...
OPERATION Using the Washing Machine Choose the desired washing cycle. • Press the cycle button repeatedly or turn Before the first wash, select a washing the cycle selector knob until the desired programme, allow the washing machine to wash cycle is selected. without clothing.
Sorting Laundry Caring before loading. • Combine large and small items in a load. Load large items first. Look for a care label on your clothes. • Large items should not be more than half • This will tell you about the fabric content of the total wash load.
Adding Cleaning Products NOTE • Do not let the detergent harden. Doing so may Detergent Dosage lead to blockages, poor rinse performance or odour. • Detergent should be used according to the • Full load : According to manufacturer’s instruction of the detergent manufacturer and recommendation.
Page 22
Using Tablet • Do not leave the fabric softener in the detergent drawer for more than 2 days (Fabric Open the door and put tablets into the drum. softener may harden). • Softener will automatically be added during the last rinse cycle. •...
Control Panel : The display shows estimate time • Power Button remaining. While the size of the load is being calculated automatically, blinking • Press the Power button to turn the or ‘Detecting’ appears. washing machine on. • : The water temperature is displayed when pressing the Temp.
Programme Table Washing Programme Programme Description Fabric Type Proper Temp. Maximum Load Provides better performance by 40 °C Cotton combining various (Cold to 95 °C) Coloured fast drum motions. garments (shirts, nightdresses, Provides pajamas, etc.) Rating optimised washing and normally performance for 60 °C soiled cotton load...
Page 25
Programme Description Fabric Type Proper Temp. Maximum Load Suitable for sports Coolmax, gore- wear such as 20 °C Outdoor tex, fleece and jogging clothes (Cold to 40 °C) sympatex and running wear. 3 kg Provides fast washing time Lightly soiled 20 °C Quick 30 for small loads...
Page 26
Drying Programme Programme Description Fabric Type Maximum Load For cottons. Select this Cotton or linen fabrics programme to reduce such as cotton towels, cycle time and energy Rating Normal ( t-shirts, and linen usage during the dry laundries. cycle. For easy iron, finish Cotton or linen fabrics, drying in damp ready to iron at the end...
Option Programme Steam (Optional) Steam Wash features enhanced washing Delay End performance with low energy consumption. Steam Softener sprays steam after a spinning You can set a time delay so that the washing cycle to reduce creases and make the laundry machine will start automatically and finish after a fluffy.
Page 30
Pre Wash ( Rinse+ ( If the laundry is heavily soiled, the Pre Wash Add rinse once. programme is recommended. Press the Power button. Press the Power button. Select a washing programme. Select a washing programme. Press and hold the Rinse+ button for 3 Press and hold the Pre Wash button for 3 seconds.
Page 31
Add Item Laundry can be added or removed after the washing programme is started. Press the Add Item button when the LED is turned on. Open the door after door lock is released. Add or remove laundry. Press the Start/Pause button again to continue the cycle.
Page 32
Beep On / Off Child Lock ( Use this option to disable the controls. This Press the Power button. feature can prevent children from changing cycles or operating the appliance Press the Start/Pause button. Locking the Control Panel Press and hold the Soil and Temp. button Press and hold the Child Lock button for simultaneously for 3 seconds to set the Beep three seconds.
Woolen Articles Dry ( • Do not tumble dry woolen articles. Pull them to Use the automatic programmes to dry most their original shape and dry them flat. loads. Electronic sensors measure the temperature of the exhaust to increase or Woven and Loopknit Materials decrease drying temperatures for faster reaction time and tighter temperature control.
Page 34
Drying Time Guide • Drying programme can last up to about 7 hours. • These drying times are given as a guide to help you set your washing machine for manual drying. • If the temperature of the drying system is not enough to complete to dry, drying time is modified automatically, and inform it by pop-up window.
• For appliances with the logo manual. • LG SmartThinQ is not responsible for any Check the distance between the appliance network connection problems or any faults, and the wireless router (Wi-Fi network).
Page 36
Installing LG SmartThinQ Push Alert Turn on the Push Alerts to receive appliance Search for the LG SmartThinQ application from status notifications. The notifications are the Google Play Store or Apple App Store on a triggered even if the LG SmartThinQ application smart phone.
Page 37
Standby power consumption 0.5 W • Once the Remote Start mode is enabled, Network standby power you can start a cycle from the LG Smart 3.0 W consumption ThinQ smartphone application. If the cycle is not started, the machine will wait to start...
Keep the phone in place until the tone trans- Use this function if you need an accurate mission has finished. Time remaining for data diagnosis by an LG Electronics customer transfer is displayed. information centre when the appliance • For best results, do not move the phone while malfunctions or fails.
MAINTENANCE Cleaning the Interior WARNING • Unplug the washing machine before cleaning • Use a towel or soft cloth to wipe around the to avoid the risk of electric shock. Failure to washing machine door opening and door glass. follow this warning may result in serious injury, •...
Cleaning the Drain Pump After cleaning, turn the pump filter and insert the drain plug. Filter • The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your washing machine.
Cleaning the Dispenser Tub Clean (Optional) Drawer Tub Clean is a special programme to clean the inside of the washing machine. Detergent and fabric softener may build up in A higher water level is used in this programme the dispenser drawer. Remove the drawer and at higher spin speed.
Caution on Freezing During • After closing the tap, disconnect the cold supply hose from the tap, and remove water Winter while keeping the hose facing downwards. • When frozen, the product does not operate normally. Make sure to install the product where it will not freeze during winter.
Page 43
How to Handle Freezing • When water is removed completely from the drum, close the hose plug used for removal of • Make sure to empty the drum, pour warm residual water, choose a washing programme, water of 50–60 °C up to the rubber part inside and press the Start/Pause button.
TROUBLESHOOTING • Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your washing machine does not function properly or does not function at all, check the following before you call for service: Diagnosing Problems Symptoms Reason...
Page 45
• Find the Wi-Fi network connected The password for the Wi-Fi to your smartphone and remove it, that you are trying to connect then register your appliance on LG to is incorrect. SmartThinQ. • Turn off the Mobile data of your...
Page 46
Symptoms Reason Solution • Follow softener guidelines to Too much softener may cause ensure appropriate amount Fabric softener overflow is used. Do not exceed the an overflow. maximum fill line. • Follow the guidelines provided by the detergent manufacturer. Too much softener may cause Softeners dispensed too early •...
Error Messages Symptoms Reason Solution Water supply is not adequate in • Check another tap in the house. area. Water supply taps are not • Fully open tap. completely open. Water supply hose(s) are kinked. • Straighten hose(s). The filter of the supply hose(s) are •...
Page 48
Symptoms Reason Solution Ensure door is not open. • Close the door completely. is not released, call for service. Door sensor has malfunctioned. • Unplug the power plug and Control error. call for service. • Close the water tap. Water overfills due to the •...
• Costs associated with removal of your Product from your home for repairs. • The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in accordance with published installation instructions, including LG’s owner’s and installation manuals.
Page 50
Strange vibration or noise Remove the transit bolts caused by not removing & tub support. transit bolts or tub support. Transit Carton bolt support base Leakage caused by dirt (hair, Clean the gasket & door lint) on gasket and door glass.
Page 51
Leakage caused by improper installation of drain hose or Reinstall the drain hose. Elbow Bracket clogged drain hose. Tie Strap Leakage caused by improper installation of water supply Reinstall the supply hose or using other brand hose. supply hoses. No power problem caused Reconnect the power by loose connection of power cord or change the...