Preparation Of Cabinet - LG LW1216HR Owner's Manual

Preparation of Cabinet

1
Remove 4 screws which fasten the cabinet
at both sides and at the back. (Keep the
screws for later use.)
2
Slide the unit from the cabinet by gripping
the base pan handle and pulling forward
while bracing the cabinet.
CAUTION
● The unit is heavy. To prevent injury, use
proper lifting techniques when pulling unit
forward from cabinet. Obtain assistance
from another person if possible.
3
Cut the window sash seals (Foam-PE)
to the proper length. Peel off the backing
and attach the adhesive-backed foam to
the underside of the window sash and the
bottom of the window frame.
4
Shipping
Screws
5
6
Foam-PE
NOTE
(Adhesive backed)
● Use a long screwdriver to make installing
Insert the hooks on the lower panel guides
into the slots on the bottom of the cabinet.
Make sure that the flanges on the lower
panel guides will face toward the inside of
the room.
Insert the top and bottom rails of the curtain
panels into the upper and lower panel
guides.
Upper Panel Guide
Left Curtain Panel
Lower Panel
Guide
CAUTION
● The lower panel guides are easily broken.
Be careful with them when installing the
cabinet.
Fasten the curtain panels to the unit with 8
type A screws.
Fasten the screws behind the curtain panel.
Screws
(Type A)
the screws easier.
INSTALLATION 11 EN
Hook
Indoor
Right Curtain Panel
Screws
(Type A)