Operation; Control Panel And Remote Control - LG LW1216HR Owner's Manual

OPERATION

Control Panel and Remote Control

1
5
6 4
NOTE
● The feature may be changed according to the type of model.
Power
1
Press to turn the air conditioner ON or OFF.
Fan Speed
2
Press to set the fan speed to Low (F1),
High (F2).
Delay ON/OFF Timer
3
Delay ON - When the air conditioner is off,
set it to automatically turn on from 1 to 24
hours later, at its previous mode and fan
settings.
Delay OFF - When the air conditioner is on,
set it to automatically turn off from 1 to 24
hours later.
NOTE
● Each press of the Timer button advances
the timer by 1 hour. After the last press
the display returns to the temperature
setting.
Operation Mode
4
Press the Mode button to cycle between
4 types of air conditioner operation:
Energy Saver / Cool / Fan / Heat.
7
3 2
Remote Control
7
3
Energy Saver - In this mode the
compressor and fan turn off when the set
temperature is achieved. Approximately
every 3 minutes the fan turns on to allow
the unit sensor to accurately determine if
more cooling is needed.
Cool - This mode is ideal on hot days to
cool and dehumidify the room quickly. Use
the Temp buttons to set the desired
room temperature and use the Fan Speed
button to set the desired fan circulation
speed.
Fan - In this mode the fan circulates air
but the compressor does not run. Use
the Fan Speed button to set fan speed to
High or Low. In this mode, you
cannot adjust the set temperature.
Heat - This mode is ideal on cold days to heat
the room quickly. Use the Temp
buttons to set the desired room temperature
and use the Fan Speed button to set the
desired fan circulation speed.
Wi-Fi (Wi-Fi Model Only)
5
Enables connection of the air conditioner to
a home Wi-Fi network.
OPERATION 15 EN
1
2
4