Headset Demo With A Nokia 6310(I) - Semtech XE1401SK User Manual

2.3

HEADSET DEMO WITH A NOKIA 6310(I)

After you have started the XE1401SK Software Demo, Switch ON your NOKIA 6310(i) cell phone. Enter the PIN
code of your cell phone and after few seconds the main menu appears
Put your mobile phone in Bluetooth™ mode by choosing the Bluetooth™ menu
option .
Highlight the option "On" and push Select
headset device . If you go back on the main menu
the screen.
In order to discover Bluetooth™ devices, choose the Bluetooth™ menu
audio accessories" option
process .
As soon as devices are found, the device names are displayed
push Select.
The connection phase starts
Otherwise the message "No devices found" is displayed.
Note! Sometimes the search procedure
When the connection is established the Remote BD address field (in the XE1401 Demo Software) contains the
address of the NOKIA 6310(i) cell phone.
Then push any key on your cell phone and the word "Connected" appears in the headset section of the Software
Demo. Now the cell phone and the headset are connected and ready for communication.
Note! If the Nokia 6310(i) cell phone is not used for more than 5 seconds, the headset communication is
automatically put in stand-by mode. Push any button on the cell phone to reactive the communication.
© Semtech 2006
. Now your cell phone is able to communicate with a Bluetooth™
, the Bluetooth™ sign appears on the top-left corner of
. Push the Select button and the mobile phone starts immediately the search
and if the connection is established the message "Connected to" appears.
must be restarted to discover the desired device.
5
XE1401SK Hardware
.
and select the Bluetooth™
again and select the "Search for
. Choose the device you want to connect to and
Users Guide
www.semtech.com