Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially hazardous situations, could result in death or serious • injury. • Read and understand this and all other supplied manuals before installing, operating, repairing, maintaining, changing accessories on, or working near this product.
Page 3
(11), bolt to: 15. Install the throttle valve into the throttle valve body. MX60 – 250 ft-lb (339 Nm) (3/4in.) 16. Insert the throttle valve kit (11) into the housing (1). Make sure MX60 – 240 ft-lb (325 Nm) (7/8in.) that the slot in the top of the throttle body lines up with the slot MX90 –...
If erratic operation continues or oil. Refer to Product Information Manual 51955631 for Air Paving stalling persists, disassemble the breaker and check for binding of Breaker Models MX60 & MX90, Lubrication, for the correct lubricating parts. oil specifications.
Trouble Probable Cause Solution Erratic or sluggish operation. Lubricating oil too heavy, slowing down Use only the recommended lubricating oil. valve action. Gummed oil or dirt in operating parts. Dismantle breaker and clean out dirt and gummy residue. Service the breaker with clean oil. Protect the tool from dirt when idle.
Page 6
Maintenance Records Run Time Work Date Work Performed Qty. (Hours) 51984144_ed6...
Page 7
Run Time Work Date Work Performed Qty. (Hours) 51984144_ed6...
Page 8
Run Time Work Date Work Performed Qty. (Hours) 51984144_ed6...
Need help?
Do you have a question about the MX60 and is the answer not in the manual?
Questions and answers