10.5
Mounting positions
The type of construction designations are compliant with IEC 60034-7 (Code I).
The geared motors must be operated only in the type of construction specified on the rating
plate. This ensures that the correct quantity of lubricant is provided.
Note
Depending on operating mode (e.g. travel on an incline), no ventilation is provided.
Explanation of symbols in type of design graphics:
Ventilation
A, B
V
*
①
②
BA 2515
Operating Instructions, 10/2016, A5E38123453A/RS-AB
Oil level
Position of output shaft
Gearboxes of size 38 are fitted as standard with a screw plug at point "V";
ventilation is not required.
On opposite side
Engaged
Disengaged
Technical specifications
10.5 Mounting positions
Oil drain
63