Table of Contents
Advertisement
Installation
4.1
Unpacking
NOTICE
Transport damage impairs the correct function of the geared motor
Never commission faulty or defective motors.
Check the motor for completeness and damage. Report any missing parts or damage
immediately.
Remove and dispose of the packaging material and transport equipment in compliance with
regulations.
4.2
General information concerning the installation
Assembly work with the system under load
Under load, the system can start or reverse in an uncontrolled fashion.
The entire system must be load-free so that there is no danger during this work.
NOTICE
Destruction caused by welding
Welding destroys the geared parts and bearings.
Do not weld on the gearbox. The gearbox must not be used as a grounding point for
welding operations.
NOTICE
Overheating caused by solar radiation
Overheating of the gearbox due to exposure to direct sunlight.
Provide suitable protective equipment such as covers or roofs. Prevent heat accumulation.
BA 2515
Operating Instructions, 10/2016, A5E38123453A/RS-AB
WARNING
4
27
Advertisement
Table of Contents
