Advertisement
Stand-Alone Label Printer
Microsoft Windows Installation Instruction
USB Printer Connection
Read BEFORE you unpack your equipment
Continue reading below
Let's get your Label Printer up
and running.
Let's first get together the things you need:
•
Your Network Printer box.
•
A PC with full admin rights to download and install software.
•
An available USB port on your PC.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pitney Bowes SP100
Summary of Contents for Pitney Bowes SP100
- Page 1 Stand-Alone Label Printer Microsoft Windows Installation Instruction USB Printer Connection Read BEFORE you unpack your equipment Continue reading below Let’s get your Label Printer up and running. Let’s first get together the things you need: • Your Network Printer box. •...
- Page 2 1. Unpack your Printer. Below is the contents you will find in the box. If you have any problems during this installation, refer to the ‘Troubleshoot’ section at the end of this guide. Printer Power Cord Network Cable (not used for USB installation) 2.
- Page 3 Otherwise continue to step 7. 6. Manually download the printer driver. 1. Go to pitneybowes.com/ca/en/spnetworksendkit 2. Select Download Drivers for PB-SP100 Label Printer in Downloads section. 3. Select in the Download your Windows printer driver section. 4. Select Run or Open depending on your browser.
- Page 4 Troubleshoot Printing problems on PB-SP100 If you experience problems with a PB-SP100 printer, such as poor print quality, misaligned labels, jams, or flashing LED indicator lights, ensure that the roll is properly installed in the printer. If the labels are blank, the roll may be loaded upside down.
Need help?
Do you have a question about the SP100 and is the answer not in the manual?
Questions and answers