Lindy IPower Switch Classic 8 User Manual page 8

User Manual English
Configuration – Network
This tab is for IP address configuration. The IPower switch will request an IP address if a DHCP server is
present in your network. If there is no DHCP server present, the IP address will be set to 192.168.0.216.
Configuration – Mail
This tab is to configure messages to pre-defined accounts when different evens are occurring. The
message in the email will show as below:
Indicates OutletA~H status order: 0 (power off) or 1 (power on).
Configuration – SNMP
This tab is to configure network management protocols.