Advertisement
User Manual
English
System Management
Scan Subnet
Search all IP addresses of PDUs that are connected under the same subnet.
1. Select the way to scan the PDU in the network: Scan network interface subnet or scan the specific
subnet.
2. Press the "Scan" button to search for all PDU devices under this subnet.
3. Check the box of "Add" for those you want to add to PDU utility.
4. Select one of the groups in the "Device Group" to assign the category to the PDUs.
5. Select "OK" to finish the procedure.
General Settings
Mail
When the event occurs, the PDU utility will send an email message to the pre-defined account.
Advertisement
