Table of Contents
Advertisement
Backlight Power Select
(LCD_BLT_VCC)
(5-pin BKT_PWR1)
(see p.8 No. 6)
Backlight Control Level (CON_LBKLT_CTL)
(3-pin BLT_PWM1)
(see p.8, No. 10)
Digital Input / Output Default Value Setting
(3-pin JGPIO_SET1)
(see p.8, No. 18)
BL1, BL2
(2-pin BL1)
(see p.8, No. 3)
(2-pin BL2)
(see p.8, No. 3)
ATX/AT Mode Jumper
(2-pin SIO_AT1)
(see p.8, No. 26)
Chassis Intrusion Header
(2-pin CI1: see p.8, No. 27)
Use this to set up the backlight
power of the LVDS connector
and the panel backlight power
of BLT_PWM1.
1-2: LCD_BLT_VCC: +5V
2-3: LCD_BLT_VCC: +12V
4-5: LCD_BLT_VCC: DC_IN
1-2: eDP Level
2-3: CH7511B Control
Open : ATX Mode
Short : AT Mode
This motherboard supports
CASE OPEN detection feature
that detects if the chassis cover
1
GND
has been removed. This feature
Signal
requires a chassis with chassis
intrusion detection design.
Short: Active Case Open
Open: Normal
16
1-2: Pull-High
2-3: Pull-Low
Open: Protect LCD_BLT_VCC
Short: No Protect LCD_BLT_VCC
Open: Protect LCD_VCC
Short: No Protect LCD_VCC
Advertisement
Table of Contents
