Operation; To Use All Features; Control Panel - Panasonic NR-BD418P Operating Instructions Manual

Operation

To use all features

Control Panel

Temperature setting and a guide of temperature
The temperature can be adjusted for Min-Max levels.
Press [Fridge] button to adjust temperature in refrigerator compartment and press
[Freezer] button to adjust temperature in freezer compartment.
Temperature
setting
Button
Fridge
Freezer
Normally, use the refrigerator with the temperature set to "Med".
(If the temperature control of the freezer compartment or refrigerator compartment is
set to other than "Med", ECONAVI does not operate.)
How to operate the "9 levels" mode
This refrigerator is specially designed with adjustable temperature levels using 9
different temperature levels as explained below:
For the Refrigerator Compartment
1 Set the LED display to the "Min" position by pressing the [Fridge] button.
2 Press and hold the [Fridge] button for 10 seconds until the LED display is at the "Min"
position.
3 Use the [Fridge] button to set the required temperature mode, where one step is
the minimum cooling mode and 9 step is the maximum cooling mode.
For the Freezer Compartment
Operate above 1 and 3 steps with pressing [Freezer] button instead of [Fridge]
button.
To reset the setting "9 levels" mode
Repeat steps 1 and 2 to return the unit to normal operation mode.
Cooling
Level
Step
LED Display
● The temperature control can vary depending on the environment and amount of food
stored in the refrigerator.
6
NR-BD468(EN).indd 6 NR-BD468(EN).indd 6
Max
Lower than "Med"
by 2°C ~ 3°C
Lower than "Med"
by 2°C ~ 3°C
Minimum
1 2 3
Lighting
Med
Approximately Higher than "Med"
1°C ~ 6°C
Approximately Higher than "Med"
-23°C ~ -17°C
4 5 6
Blinking
Min
by 2°C ~ 3°C
by 2°C ~ 3°C
Maximum
7 8 9
Not lighting
12/15/16 4:39 PM 12/15/16 4:39 PM