Advertisement
1
2
A
How to use
Indicator
POWER
TIMER
i AUTO-X
nanoe-G
ECONAVI
B
OFF/ON
OFF/ON
C
MODE
TEMP
SLEEP
AIR SWING
QUIET
FAN SPEED
ON
SET
TIMER
OFF
CANCEL
AIR CONDITIONER
D
Not used
Press to restore
in normal
the remote
control to default
operations.
setting.
12
E
F
A3
3
To adjust vertical air ow direction
Upper direction
AIR SWING
Lateral direction
• Do not adjust the ap by hand.
To adjust fan speed
AUTO
FAN SPEED
FAN
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
• If i AUTO-X mode is set, fan speed is xed to AUTO.
To adjust fan speed, cancel i AUTO-X mode.
To purify the air
• nanoe-G starts automatically when the unit is turned
OFF/ON
OFF/ON
on with
.
• nanoe-G will not start automatically during ON timer
OFF/ON
OFF/ON
if the unit has been turned off by
.
• Can be activated even when the unit is turned off.
In this condition, the unit will operate as a fan with
AUTO fan speed and ap swing.
To enjoy quiet operation
QUIET
• This operation reduces air ow noise.
To save energy
• When manual AIR SWING
is selected, the
ECONAVI operations will be cancelled.
Panasonic Appliances Air-Conditioning Malaysia Sdn. Bhd. & Panasonic Appliances Air-Conditioning R & D Malaysia Sdn. Bhd.
4
5
To reach temperature quickly
i AUTO-X
• The unit controls set temperature according to room temperature to accelerate room cooling.
• After max 4 hours, the set temperature follows the last set temperature setting.
• Fan speed is xed at AUTO, fan speed selection is prohibited.
• During unit is off, press
• i AUTO-X mode can be cancelled by pressing the respective button again.
To maximise comfort while sleeping
SLEEP
• This operation provides you with a comfortable environment while sleeping. It will automatically
adjust the sleep pattern temperature during the activation period.
• The indoor unit indicator will dim when this operation is activated. This is not applicable if
the indicator brightness has been manually dimmed.
• This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer. Sleep operation has the priority over OFF timer.
• This operation can be cancelled by pressing the respective button when the sleep timer
reaches 0.0h.
To set the timer
2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset
times.
1
2
3
ON
SET
TIMER
OFF
CANCEL
CANCEL
1 Select ON or OFF
timer
• Each time pressed:
Cancel
2 Set the time
3 Con rm
Note
SLEEP
,
,
• Can be activated in all modes and can be
cancelled by pressing the respective button
again.
6
7
Set temperature
-1°C /
-2°F
Max = 4 hours
will turn on the unit with i AUTO-X mode.
(CANCEL)
• To cancel ON or OFF timer, press
to select respective
or
then press
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing
or
to select respective
ON
OFF
then press
.
SET
Example:
• The nearest timer setting will be displayed and
OFF at 22:00
will activate in sequence.
OFF
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For
clock setting, please refer to Quick Guide.
SET
QUIET
,
,
• Cannot be selected at the same time.
OPERATING INSTRUCTIONS ( 8 / 11 )
8
A
B
C
or
ON
OFF
.
CANCEL
or
D
13
E
ACXF55 - 1870 0
F
UNIT : mm
Advertisement
