Table of Contents
Advertisement
0-2
Introduction
About This Manual
The emergency response procedures for the Explorer and Aviator, Hybrid (FHEV) and plug-in hybrid (PHEV) vehicles are similar to those for
traditional gasoline-powered vehicles with the addition of special considerations for the High Voltage electric system components.
These vehicles use a conventional gasoline engine in addition to an electric motor to power the vehicle.
•
Gasoline is stored in a traditional fuel tank.
Electricity is stored in a High Voltage battery pack.
•
The combination of a gasoline engine and electric motor provides for improved performance, reduced emissions and improved fuel economy.
The FHEV High Voltage systems are self-contained, never needing to be plugged into an electrical outlet for recharging. The PHEV High
Voltage system can be plugged into an electric outlet for recharging to optimize the vehicle's extended electrical range. Both vehicle systems
incorporate a generator that charges the High Voltage battery during cruising and braking.
The information in this guide will allow response to emergencies involving these vehicles to be as safe as non-hybrid vehicles.
These vehicles have been designed with many safety features for your protection. These features help provide safe access to the vehicle
under various conditions. However when approaching an electric vehicle in a fire, rescue or recovery situation, always follow one industry
standard rule:
ALWAYS ASSUME THE VEHICLE'S HIGH VOLTAGE SYSTEM IS POWERED UP!
Explorer Hybrid Vehicle (FHEV) Identification — Vehicle Exterior
FHEV vehicles are identified by the hybrid badge located on the liftgate.
Aviator Plug-in Hybrid (PHEV) Identification — Vehicle Exterior
PHEV vehicles are identified by the:
•
Blue backing on the front grille Lincoln badge
•
Blue lettering on the fender "Aviator" badge lettering
Introduction
2020 Explorer / Aviator Hybrid Vehicle Emergency Response Guide - 04/2019
Introduction
Advertisement
Chapters
Table of Contents
