2. Select the Place you want to navigate to.
Your chosen Place is shown on the map with a pop-up menu.
3. To plan a route to this destination, select Drive.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance
view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time
difference in hours and half hours in the arrival information panel. The estimated time of arrival is the
local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Planning a route to a contact using My Places
Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a
route before you start driving.
Note: When you use TomTom GO Navigation app for the first time, there may be a short delay while the app
finds all your contacts that have full addresses. The time taken depends on the number of contacts in your
contacts app.
Note: You can only plan a route to a contact that has a full address which can be found on the map area
installed on your device. The address must have a house number, a street, and a city.
To plan a route to a contact in your smartphone contacts app, do the following:
1. Select My Places from the main menu.
2. Select Contacts.
3. Select a contact.
The contact's address is shown on the map.
Note: If your contact has multiple addresses, all the locations are shown on the map. Select a location to
show the address.
4. To plan a route to this destination, select Drive.
A route is planned and then guidance to your destination begins. As soon as you start driving, the
view
is shown automatically.
40
guidance