Planning A Route Using The Map - TomTom GO User Manual

2. Select the Contacts.
3. Use the keyboard to enter the name of your contact you want to plan a route to.
As you type, suggestions based on what you have entered are shown You can continue typing or select a
suggestion.
Tip: If you press and hold
available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more.
Tip: To see more results, hide the keyboard or scroll down the results list.
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button:
4. Select the contact you want.
Tip: If your contact does not have an address, press and hold on your contact name and you will get the
option to add an address.
Your contact is shown on the map.
Note: If your contact has multiple addresses, all the locations are shown on the map. Select a location to
show the address
5. To plan a route to this destination, select Drive.
A route is planned and then guidance to your destination begins. As soon as you start driving, the
view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time
difference in hours and half hours in the arrival information panel. The estimated time of arrival is the
local time at your destination.
Tip: You can add a stop to a route that you have already planned.
Tip: You can save a route using My Routes.

Planning a route using the map

Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a
route before you start driving.
To plan a route using the map, do the following:
1. Move the map and zoom in until you can see the destination that you want to navigate to.
a letter key on the keyboard, you get access to extra characters if they are
38
guidance