G.S.M Activate 3G RF DOOR Manual page 4

After inserting the simcard into the GSM module, turn the unit on and wait until you see the
GREEN LED is on. This indicates that the module has a signal and the unit is ready for
use.
Please Note - To avoid confusion we have colour coded the hash (#) and the equals (=)
symbols.
Example: (hash) (1,2 or 3) (equals) (phone number) (hash)
To programme mobile numbers into the unit you will need to send a text with the contact
numbers (maximum 3 numbers)
Example
#1=07123456789#
#2=07123456789#
#3=07123456789#
If you wish to cancel a number, follow this example
Example: (HASH) (1,2 or 3) (EQUALS) (DELETE) (HASH)
#1=DELETE# Then send this as a text to the simcard number of your unit.
PLEASE NOTE
Please send one message at a time and wait for the GSM detector to send you back the text
acknowledgement 'NUMBER STORED' before you try to add the next number.
Below is a notepad to help you remember the numbers that you have saved to your
unit in the event you need to modify or delete in the future.
#1=_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#2= _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
#3=_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
How to Programme Mobile Numbers
Then send this as a text to the simcard in the unit (with your
preferred mobile number)
Then send this as a text to the simcard in the unit (with your
preferred mobile number for second contact)
Then send this as a text to the simcard in the unit (with your
preferred mobile number for third contact)
#
#
#
Page 4