Signal Strength - G.S.M Activate 3G RF DOOR Manual

2g & 3g gsm door contact alarm
Table of Contents

Advertisement

Instructions
Slide the simcard into the holder making sure that the clipped corner of the simcard lines
up with the clipped corner of the simcard holder as seen in the picture above.
IMPORTANT - PLEASE READ
PLEASE MAKE SURE YOU DISCONNECT THE POWER WHEN YOU FIT THE SIM
CARD THEN PLACE THE SIM CARD IN WITH THE CLIPPED CORNER FACING
UPWARDS.
PLEASE SEE PICTURE ABOVE.

Signal Strength

To help make sure that you place the unit in a suitable position you can text the unit to see
how much signal strength the detector is receiving by texting the command
#SIGNAL#
The detector will perform a test on the signal strength.
You will receive a text confirming the signal strength between 0 up to 30. We strongly
recommend that you place the unit where it can receive a signal of at least 10.
You will find that with a score of less than 10 the unit will be unreliable.
Page 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

2g rf door

Table of Contents