Blaupunkt BLUEBOT XPRO Instruction Manual page 30

Pause | Sleep mode | Shutdown
Pause: During the operation of the Robot, press the on/off button | robot
key or "Pause" button on the remote control to pause the operation of
the Robot.
Sleep mode: If the Robot stops working for more than ten minutes, it will
automatically enter sleep mode (all the Robot lights are off ).
To wake up the Robot please Tap the on/off button firstly. Than tap the on/
off button again / or use the remote control to start operation again.
Shutdown: when the robot stops working and you want to shut it down
completely, long press the on/off button | robot key to fully shut down the
robot (all the Robot lights are off ). Be aware that once the robot is shut
down it will not go back to its docking station automatically.
Set a Time Schedule
Tap the "Time Schedule" button non the remote control to set the
Robots cleaning time schedule.
After the setting is completed successfully, the Robot will automatically
start its cleaning cycle at the scheduled time every day.
Remark! Before you schedule a time, you need to set the current time
through Clock settings on remote control.
30