Main Application Window Operation - Epson S1V30000 Series Application

4. Main Application Window Operation

The main application window has four lists of options to determine which setup the user will have. In general,
these four options will not have to be modified, unless changing the mode or target device. One list allows
selection of the COM port from which the user will be communicating to the evaluation board. The COM
port will only show the available COM ports, and will default to the COM port associated with the evaluation
board. The second list allows the user to select the communication baud rate. (Only two baud rates will
normally be used, 115200 for firmware update in evaluation mode, and 461000 for normal operation.) If
the firmware is being updated through the Download Scripts page, the baud rate will automatically be
reconfigured for firmware updates and normal operation. The third list allows the user to select between
running the evaluation mode, the demo mode or a reflash mode. The fourth list allows the user to select the
target evaluation device.
Figure 3 Main Application window (used for evaluation setup)
(The graphic and options displayed might differ depending on the target device selected in the target menu.)
The Run Demo button opens the application control window. If the Exit button is clicked, the application will
terminate.
S1V30000 Series Graphical User Interface Seiko Epson Corporation
Application (Rev 3.01)
4. Main Application Window Operation
5