CHAPTER -6: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Changing a programme with resetting
If you would like to cancel a program while a washing program is resumed
Keep the program selection button
pressed for 3 seconds. (End of program
indicator flashes and program light
turns off)
Note: When the door of the machine is opened in order to stop the washing program before it
is completed, first open the door slightly in order to avoid water spillage.
Switching the machine off
When the end of program indicator turns
on, switch your machine off by using the
Power On/Off button.
Note: After the buzzer sound indicates the end of the program when the washing program comes to an end
(end indicator light is on), you can leave the door of your machine ajar in order to hasten the drying.
Note: If the machine door opens during washing or the power is turned off, the machine will return to the
program in when the door is shut or the power is back.
Note: If energy is cut or the door is opened during the drying process, the program is terminated.
Your machine becomes ready for new program selection.
Open the door of your machine.
The LED for the last selected
program will turn on.
The discharge process starts after
closing the door of the machine. The
machine discharges the water in it for
about 30 seconds. When the program is
cancelled, your machine gives a buzzer
sound for "5 times " and the "end of
program indicator" turns on.
Pull the plug out of the outlet.
Turn off the water tap.
EN-20