Changing A Programme With Resetting; Switching The Machine Off - Sharp QW-S12I491X-EN User Manual

CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME

Changing a programme with resetting

If you would like to cancel a program while a washing program is resumed.
Open the door of your ma-
chine. Light of the last se-
lected program will turn on.
Note: When the door of the machine is opened in order to stop the washing program before it is completed first
open the door slightly in order to avoid water spillage.

Switching the machine off

When end of the program indica-
tor turns on , switch your machine
off by using the Power On/Off
button.
NOTE: After the buzzer sound which indicates the end of the program when the washing program comes to an
end (end indicator light is on), you can leave the door of your machine ajar in order to hasten the drying.
Note: If the machine door opens during washing or the power is cut off, the machine will go on to the program
in case the door is shut or the power is back.
Note: If energy is cut or machine door is opened during drying process, program is terminated. Your machine
becomes ready for new program selection.
Keep the program selection but-
ton pressed for 3 seconds. (End
of program indicator flashes and
program light turns off)
=
Pull the plug out of the outlet.
Turn of the water tap.
EN-21
=
Discharge process starts after closing
the door of the machine. The machine
discharges the water in it
30 seconds. When the program is
cancelled,your machine gives a buzzer
sound for "5 times " and the "end of pro-
gram indicator" turns on.
for about