Table of Contents
Advertisement
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING A
PROGRAMME
Program Change
If you want to change the program while another one is proceeding;
Press on Start/Standby button. 3
• Select the new program using Program button. 5
• The newly selected program continues from where the previous one was left.
• Start the programme by pressing the Start/Standby button again. 3
Cancelling programme
If you want to cancel the program while another one is proceeding;
• Hold the Start/Standby button for 3 seconds. 3
• The display will count down from 3 to 1 and when the countdown is over, the remaining time will be displayed
as 1 minute.
The machine will dispose of all the water in this 1 minute; the time is reset and completion symbol is illuminated.
Switching off the Machine
• When the Completion symbol is illuminated, switch off your machine by pressing the On/Off button.
• Later, unplug your machine and turn off its faucet.
NOTE 1: A few minutes after the program finishes and the Completion lamp is illuminated, you may open the door
slightly and leave it ajar in order for the drying process to be faster.
NOTE 2: If the machine door is opened or a power failure occurs during washing, the machine will proceed from
where it stopped after the door is closed or power is restored.
EN-24
Advertisement
Table of Contents
