Repeat Play; Displaying The Text - Alpine DVA-9965 Owner's Manual

Repeat Play

Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Press FUNC. to activate the audio function mode.
Source select mode → Audio function mode →
Source operation mode → Source select mode
2
Press the GlideTouch bar under the RPT function
in the function guide display.
The song will be played back repeatedly.
↔
RPT (off)
(Repeat One)
The RPT mode is canceled by selecting off.
• The function mode you previously recalled can be recalled again if
the GlideTouch bar is touched.
• If no operation is performed for 10 seconds, the audio function
mode turns off.
• During repeat playback, no other songs are selectable by pressing
g or f.

Displaying the Text

You can display the tag information of a song in the iPod.
Press TITLE.
Each press changes the display.
ELAPSED TIME
→
1
ARTIST NAME*
1
ALBUM NAME*
ELAPSED TIME
→
1
SONG TITLE*
CALENDAR/CLOCK
ELAPSED TIME
1
ARTIST NAME*
1
ALBUM NAME*
* 1 "NO DATA" is displayed if there is no information.
• When the Scroll Setting (page 38) is set to "MANUAL," press and
hold TITLE for at least 2 seconds to scroll the tag information
only once.
• Only alphanumeric characters can be displayed.
• When the artist name, album name or song name is set on iTunes,
and the amount of characters is increased, songs may not be
played back when connected to the adapter. Therefore, a maximum
of 250 characters is recommended. The maximum number of
characters for the head unit is 64.
• Some characters may not be correctly displayed.
• "NO SUPPORT" is displayed when text information is not
compatible with the DVA-9965.
• Playlist name cannot be displayed.
ELAPSED TIME
→
1
ALBUM NAME*
1
SONG TITLE*
ELAPSED TIME
→
Sound dependent display
43
-EN