Maintenance; General Maintenance Prescriptions; Lubrication - LFA RTP 41 Standard User Manual

Maintenance

To ensure that the RTP 41
includes methods for replacing parts, troubleshooting solutions, and how often to grease and
clean your machines to keep its performance optimal.

General Maintenance Prescriptions

• Use the maintenance checklist (found in the Appendix) before, during, and after machine
operation.
• Make sure all grease points are maintained and regularly lubricated.
• Use an appropriate amount of lubricant. Excess grease can drip into the tablets as they are
formed.
• Before reassembling the machine after cleaning, make sure that the parts are dried and oiled.
• Constantly check for any loose nuts and/or screws before, during, and after machine operation.
• If the machine is not used for more than a week, place the Tooling in an air-tight container and
cover in lubricant.

Lubrication

Regularly greasing your machine is vital to prolonging its operational life. Parts that are not
greased properly can make the machine seize up and cause major problems later. LFA
recommends maintaining a lubrication schedule for your RTP 41
section.
Tools and Materials Needed
• Grease gun
• NLGI Grade 1 and Grade 2 grease
• SAE 90 or NSF approved equivalent
• SAE 10 oil
• Set of metric Allen keys with ball ends
• Disposable latex/rubber gloves (for food grade products and to protect hands from grease)
• Hairnet and/or beard net (food grade products only)
• Sterile shoe covers (food grade products only)
WARNING: To prevent any potential personal injury, unplug the RTP 41
electrical outlet.
Instructions
Note: Wear latex/rubber gloves (and appropriate food grade attire if applicable) during this
process.
1. Raise each of the Perspex Casing's doors until they are held up by the pistons.
25
will have a long operational life, maintenance is essential. This section
®
, which can be found in this
®
from the
®