Table of Contents
Advertisement
Accessories: Quick Transit Cover
The Quick Transit Cover is an ingenious device to rapidly turn
your folded bike into an unobtrusive package. It disappears into a
small frame-mounted bag when not in use.
The Quick Transit Cover
attaches to the mainframe
®
of your tikit
with the two
bolts already in the frame.
1. To use your Quick Transit
Coverbag first fold your tikit
(see page 8). Then open the
bag cover and pull the loose
part of the bag out. Part of
the bag will stay attached to
the bike to allow the handle
to work once the bike is
covered.
2. Pull the walking handle
(under the seatmast )
through the hole in the bag
marked with a yellow tag.
3. Then stretch the front
part of the bag over the front
wheel. If you have a front
rack on your bike, make
sure the bag is stretched
over the front rack. Then
stretch the back part of the
bag over the back of the
seatmast and cranks.
You can walk with the black bundle rolling on the front wheel if
you have a front rack, or carry the bike with the fabric handle (top
center of bundle) and stow it in a small space. See page 9.
16
www.bikefriday.com
1.
800-777-0258 • +1-541-687-0487
Accessories: Fenders
1. Front Fender
Your front fender is attached
to the fork crown. To take it
off, simply loosen the bolt
with a 5mm hex wrench.
IMPORTANT:
Replace
the
bolt prior to riding as it is
part of the fork assembly!
2. Rear Fender
Your rear fender is attached
to the rear of the frame. To
take it off, simply take off the
bolt (B) by loosening with
a 5mm hex wrench. Then
remove the two small bolts
from the ends of the fender
support bar (C) using a 4mm
hex wrench. Replace the bolt
behind the brake after you
have removed the fender (it
keeps the threads from rust-
ing).
800-777-0258 • +1-541-687-0487
B.
C.
www.bikefriday.com
17
Advertisement
Table of Contents
