Advertisement
Engine maintenance
The purchaser is not entitled to disassemble the product. The product may only be disas-
sembled by qualified professionals or service centres.
Daily cleaning: The motor should be kept clean at all times. Never user water or cotton wool to
clean the motor.
Load current control: During motor operation, make sure that the load current remains below
the rated value.
Operating noises: Operation noises, squeaks or other random noises must not occur during
the operation of the motor. In case of such noises occurring, immediately stop the motor and
do not restart it before the adjustments necessary to solve the issue have been made.
The centrifugal switch is installed in the front end of the motor. If a noise resounds from the
centrifugal switch after the switching-on of the motor, the motor operates correctly. If the capa-
citor, however, does not make any noise and instead vibrates, turn both, the centrifugal switch
and the capacitor off.
It is not allowed to operate the capacitor over longer periods of time or under load as an in -
crease in temperature will damage the thread of the motor.
To ensure the reliable performance of the motor, maintenance should be performed annually.
General note
In order to guarantee a safe operation of the motor, you should maintain it on a regular basis (e. g.
once a year).
Connection diagram
Note:
The direction of the point is displayed to show the rotational direction from the shaft end.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62000–62009
Page 4
02
2021-1
Advertisement
