Joovy Bicycoo Mg Instruction Manual page 9

10
Disassemble/Reassemblely of the Front Wheel and Rear Wheel
• If necessary to remove either wheel from the bike, first invert the bike so that it rests on the handle
bar and seat and is stable.
• Use the 5mm (larger end) of the Allen wrench to loosen the locking bolts on BOTH sides of the
wheel just enough so that the wheel can be removed from the fork. (12) DO NOT remove the
locking bolts from the wheel.
• To reassemble the wheel, replace the wheel into the fork and tighten BOTH locking bolts securely
using the Allen wrench. (13)
12
11
13
9