Joovy Bicycoo Mg Instruction Manual page 8

Tire Pressure
• Make sure the tires are inflated to the recommended pressure. See tire side wall for correct
pressure. DO NOT overinflate the tires.
I WARNING:
Adjusting the Seat
Adjust the seat tube to a proper position based on the child's height as follows.
• Identify the seat clamp under the seat and rotate the quick-release lever clockwise to release it.(8)
• Raise/lower the seat to the desired height, make sure the safety line is NOT visible and the seat is
in line with the wheels. (9)
• Rotate the quick-release lever counter clockwise to tighten it. (10)
• If the lever cannot be completely locked in place, turn the adjustment knob on the bracket ¼ turn
counter clockwise to loosen it. (11) Again, rotate the quick-release lever counter clockwise to
tighten it.
• Repeat this process until the quick-release lever can be tightened securely.
• Push and pull on the seat to make sure it is secure.
• If the seat can be moved up or down, it is too loose. Unlock the quick-release lever and turn the
adjustment knob clockwise a small amount.
• Tighten the quick-release lever and check to be sure the seat cannot move up or down.
• Repeat this process until the quick-release lever can be tightened and the seat cannot move up or down.
• Check for the correct seat height by having your child sit on the seat. Make sure your child's feet
touch the ground and your child is able to walk. If necessary, adjust the seat height in order to
make sure that your child is comfortable on the balance bike. The correct seat height is essential
for proper function.
I WARNING:
seat clamp are tightened securely. Check and adjust the seat height
periodically. DO NOT allow children to adjust the seat clamp.
8
8
Check and adjust tire pressure before riding.
Make sure the quick-release lever and
9