Alphasmart Dana Getting Started Manual page 66

1. Turn Dana off.
2. Remove optional screw (if installed).
3. Slide the battery door to the left and lift it off.
4. Remove the rechargeable battery but DO NOT unclip it.
5. Place 3 AA alkaline batteries in the battery compartment
6. Unclip the rechargeable battery.
7. Replace the battery door and slide it to the right to lock it in
62 Dana In-Depth
(positive to right).
Warning: To avoid data loss when changing alkaline
batteries, always turn Dana off before removing the
batteries and replace the batteries within 30 seconds.
place.
Battery Clip in place
Push to release
To Dana
Battery