Beaming Applications - Alphasmart Dana Getting Started Manual

3. When the Beam Status dialog box appears, point the IrDA port
4. Wait for the Beam Status dialog box to indicate the transfer

Beaming applications

1. Press the apps key.
2. Press the send key.
3. Tap the Beam from pick list, and then select Dana or Card. To
4. Tap the application you want to transfer.
5. Tap Beam.
6. When the Beam Status dialog box appears, point the IrDA port
7. Wait for the Beam Status dialog box to indicate the transfer is
54 Dana In-Depth
on the top of Dana at the receiving IrDA port.
Tip: You can also beam data by selecting the
appropriate beam command from the Record menu.
is done.
beam an application from a card, you must have a card inserted
into the expansion card slot.
on the top of Dana at the receiving IrDA port.
done.