Advertisement
Using a dry 1" (25 mm) paint-brush, remove any dust from the tube.
If the mains lead is damaged, it must be replaced by the manufacturer or an
authorised service centre. If the mains plug needs to be replaced, proceed as
follows:
positioned correctly (over the outer sheath of the cable) and it fully tightened.
Due to the high surface temperature of these heaters, we strongly recommend
the use of our safety guards whenever the devices are situated below 2m from
the floor or where Animals, Children or Flammable objects (such as clothing) may
come into contact with the heater. These are available from your stockist.
Product Codes:
EH1720 – Protective Grille
EH1722 – Replacement Brackets
Connect the brown wire to the terminal
labelled "L".
Connect the blue wire to the terminal
labelled "N"
Connect the green/yellow wire to the
terminal labelled with the earth symbol or
"E".
Make sure that the cord-grip is
SAFETY
4
Advertisement
