Enabling Password Protection For Alphaword Plus Files; Enabling Or Disabling File Passwords While Working In Alphaword Plus; Enabling Or Disabling File Passwords In The Control Panel - Alphasmart NEO 1 User Manual

P
A S S W O R D S O N

Enabling Password Protection for AlphaWord Plus Files

E n a b l i n g P a s s w o r d P r o t e c t i o n f o r A l p h a W o r d P l u s F i l e s
You can enter the
master password
instead of the file's
password to open that file
when password protection is
enabled.
76
N E O
When you first receive your NEO, you cannot set individual file passwords
until you enable password protection. When password protection is enabled,
any time you press a file key or open a named file, you must enter the file's
password. When you enable password protection, you must enter the master
password. You can set that password in AlphaSmart Manager (see page 115)
or contact Technical Support to get the default master password. (You can
also use AlphaSmart Manager to enable password protection; see page 117.)
There are two ways to enable password protection on your NEO: you can
enable it while in AlphaWord Plus or the Control Panel.
Enabling or Disabling File Passwords While Working in
AlphaWord Plus
1. Be sure you know your master password (see page 115 to set the master
password using AlphaSmart Manager).
2. Press ctrl-option- -P. A message will tell you whether password
protection is on or off.
3. To change the setting, type the master password and press enter. A
message will tell you what the setting has been changed to.
4. Press any key to exit the screen. All AlphaWord Plus files will have the
password write until you change the password for each file (see
page 77).

Enabling or Disabling File Passwords in the Control Panel

1. Be sure you know your master password (see page 115 to set the master
password using AlphaSmart Manager).
2. Press applets.
3. Move the cursor next to Control Panel and press enter.
4. Move the cursor next to AlphaWord settings and press enter.
NEO 1 and NEO 2
User Manual