How To Send A Linked File To Your Neo(S) - Alphasmart NEO 1 User Manual

How t o Send a Li nked Fi le t o Your NEO(s)
You can also click
the Linked Files
button, type the text
for the linked file in the
<form> tags that have been
entered for you in the new
window, and then click OK
to come back to the main
window. See page 93.
NEO 1 and NEO 2
User Manual
W
R I T I N G O N
1. Start AlphaSmart Manager on your computer and connect your NEO.
2. Click the AlphaWord Files to Send tab.
3. In the file list on the left, click the file number that you want to send to on
the NEO(s) A .
4. In the File # window
B
be in the linked file should be inside <FORM> and </FORM> tags as
shown above. If you want to send any text for the main AlphaWord Plus
file (not the linked file), insert it before or after the <FORM> tags.
In your linked file, you can use the tags below to insert check boxes,
specify a preformatted section, and control line breaks. The tags in the
table are similar to HTML tags. Most have a beginning tag enclosed in
angle brackets (<tag>) and an end tag enclosed in angle brackets with a
forward slash (</tag>).
Tag Description
<FORM> Begin a linked file.
</FORM> End a linked file.
[] [ ]
or Insert a check box.
<PRE> Begin a preformatted section (use this when you want
to precisely control line breaks).
</PRE> End a preformatted section.
<NOBR> Begin no break text (use this to keep the text that
follows on a single line, if possible).
N E O U A
S I N G
A
, type the text for the linked file. All text that should
W P
L P H A O R D L U S
Using Linked Files
B
43