Distributor, Oil Cooler, Exhaust Pipe, Heat Exchanger - Volvo Penta AQ145A Workshop Manual

147. Place the gasket and crescent-shaped rubber
seal in position and fit the valve cover.
Distributor
148. Turn the crankshaft to the firing position for No. 1
cylinder. Check this by unscrewing the oil filler
cap and seeing how the camshaft's cams are po-
sitioned and by checking the marking on the pul-
ley. See also point 138.
46
149. Remove the distributor cap.
150. Turn the rotor so that the line on it is at 60° from
the line on the distributor.