Table of Contents
Advertisement
61.
Remove the locking rings for the gudgeon pins
and press the gudgeon pins out.
62.
Note that there are markings for the main bearing
caps. The bearing caps are marked 1–5 from the
transmission side. Remove the main bearing
caps.
24
63. Lift out the crankshaft and remove the bearing
shells from the block and the bearing caps.
CLEANING AND INSPECTION
64.
Clean and carefully inspect the cylinder block.
The plugs for channels are to be removed before
cleaning. Re-fit the plugs after cleaning has been
completed. Tightening torque:
1/4 NPTF – 20 Nm (2 kpm) (14.7 lbf. ft.)
3/8 NPTF – 30 Nm (3 kpm) (22.1 lbf ft.)
Hide quick links:
Advertisement
Table of Contents
