Installation Checklist - Evenflo Big Kid Owner's Manual

1. Remove the backrest from the booster seat.
(See Removing the Backrest, p. 26.)
2. Place the booster seat on the vehicle seat.
3. Set the child in the booster seat.
Make sure the child's back is flat against the vehicle
seat,and the child's bottom is flat against the booster
seat.
4. Secure the child and booster seat to the
vehicle seat.
Stretch the lap/shoulder belt across the child and
fasten the buckle beneath the armrests.
5. Use the shoulder belt clip, if necessary.
If the shoulder belt does not properly lay midway
between the child's shoulder and neck, attach and
adjust the shoulder belt clip (see Using the Shoulder
Belt Clip, p. 28).
The shoulder belt
off the child's shoulder. If you can not adjust the shoulder
belt to properly lay midway between the child's shoulder
and neck, try another seating location or do not use the
6. Check your work.
Make sure the lap belt is stretched low and snug
across the child's hips, beneath the armrests, and
fastened into the buckle. The shoulder belt must cross
the child midway between his/her shoulder and neck.
Note: If the vehicle's shoulder belt naturally crosses
the child's shoulder, you do not need to use the
shoulder belt clip.
Always secure the booster seat with the vehicle seat belts
when not occupied. An unsecured booster seat can fly into
and injure other occupants in the event of a crash.

Installation Checklist

WARNING
MUST NOT
booster seat.
Important
cross the child's neck or fall
25