ADF Web HD67D27-B2-868MHz User Manual page 22

Industrial Electronic Devices
In the field "Bit Mode" insert the start bit of the first byte of the field "Position" where start to insert the data read;
In the field "Lenght" the dimension of the KNX message is defined;
In the field "Mnemonic" the description for the request is defined.
Note:
If the field "On change" is checked and the "Poll Time" is different from 0, the converter sends the KNX command cyclically and also
when the data is changed.
Note:
If the field "OnCMD", "OnChange" and "OnTimer" are not checked, the converter only sniffs the bus in order to monitor the status of
the KNX message.
ADFweb.com S.r.l.
User Manual LoRaWAN / KNX
Document code: MN67D27_ENG Revision 1.000 Page 22 of 29