Triax TDcH Series User Manual page 23

TDcH Compact Headend
To set up a tuner you have to follow the following steps:
1. Select the "Input":
•
To select the required input / SAT-IF signal, click on the input field to open the drop-down list with the
inputs you can choose from.
•
Select the input you want to use.
2. Enter the desired frequency in MHz in the frequency field:
3. Enter the desired symbol rate:
4. Click the "TUNE" button to enter the information into the headend system:
By clicking on the expand button, information details from the selected transponder will be shown:
Carrier Noise Ratio:
Signal Level:
Input TS rate:
Standard:
Modulation:
Status:
Shows the carrier to noise ratio of the input signal
Displays the actual signal Level
Displays the actual symbol rate.
Shows the standard of the input signal
Shows the modulation of the input signal
shows the status of the tuner
23 EN